|Minimum Order Quantity||1 Unit|
|Noise Level||Less than 65 dB|
|Power Supply||230V AC, 50HZ|
|Material||GI Powder Coated / SS-304 / SS-316|
This solvent dispensing booth is designed in order to handle powder under aseptic conditions. While making this booth we take into consideration the incorporation of statically and dynamically balanced motor-blower that is efficient in reducing the noise level while performing operations.
Options and Accessories:
Model HEPA Area Working Area Over All Dimension
SDB-22 610 x 610 610 x 610 x 1830 710 x 1140 x 2240
SDB-32 915 x 610 915 x 610 x 1830 1015 x 1140 x 2240
SDB-42 1220 x 610 1220 x 610 x 1830 1330 x 1140 x 2240
SDB-44 1220 x 1220 1220 x 1220 x 1830 1350 x 1750 x 2240
SDB-64 1830 x 1220 1830 x 1220 x 1830 2000 x 1750 x 2240
|Minimum Order Quantity||1 Unit|
|Air Flow||100 FPM|
|Height||6' to 7'|
|Electrical Supply V||440vac three phase|
|Filtration Capacity Microns||0.3|
|Country of Origin||Made in India|
We manufacture and supply standard and customized (in terms of functionality and capacities) an exclusive line of Dispensing Booth which is a kind of partial purifying equipment for filling, refilling, weighing and sampling of raw material and compounds.
It is provided with the HEPA filter, which prevents the airborne dust by down drought technique. The unit eliminates powder contamination to protect the operator and the surrounding environment.
The dispensing booth is also called a pharmaceutical sampling booth and pharmaceuticals weighing booth. Our Sampling booth comes with two to three validation port for Pre-filters and HEPA filters. DOP test of dispensing booth must be repeated every 6 months for better functioning of the Sampling booth. Pharmaceutical Dispensing booth used in the Pharmaceutical Industry in the field of Human Body injectables.
Dispensing Booth Working Principle:-
Downward Forced air of sampling booth extracts at low level into the booths cleanliness filtration system where contaminated particles recirculated into the booth Air Flow.
In standard Working condition of Pharmaceutical dispensing booth air pulled through the main chamber to steel exhaust grills used to fasten the HEPA & PRE-filters fitted in the rear side of the booths, It suppresses airborne dust particles away from the uses breathing area.
Customized designUnique designed air duct effectively controls the noise.Smooth transitions of the wall and ground can eliminate the blind angle.The differential pressure gauge is equipped to real-time monitor the filters.Intelligent control mode and alarm system ensure the reliability of running.An automatic changeable frequency system monitors the air velocity to ensure its stability in the work area.Uniform flow design of the main working areaSampling booth has primary filters, medium efficiency filters, and HEPA filtersHEPA Filter (0.3 microns)Fine Filter (5 microns)Pre-Filter (10 microns)more than 99.97% at 0.3 micronMotor Blower AssemblyU.V. LightFluorescent LampOperating SwitchStatic Pressure ManometerSS 304/316/316L constructionUltra-quiet noise level of not more than 65 dBADurable and easy to clean stainless steel bodyGlare-free fluorescent lightPVC Flexible Curtains on all three side.
Air Velocity 90 20 Cfm (Average) Filtration Elements Main Filters: HEPA Filter Prefilter Washable non-woven polyester fibers. Filter Efficiency Main Filters : 99.97 at 0.3 micron Pre filter : Arrestance 90%, at 10 microns Fine Filter 10 micron Noise Level < 65 dBA Hepa Filter Brand Yatherm Light Intensity 800-1000 Lux Power Supply 220V Single Phase, 50 Hz.
W X D X H:
2 X 2 X 63 X 2 X 63 X 3 X 64 X 2 X 64 X 3 X 64 X 4 X 66 X 2 X 66 X 4 X 66 X 6 X 6 OR ANY SPECIAL SIZE
Our every unit provides highly satisfactory performance and a competitive price guarantee. We are a known brand in the field of clean room equipment with the best prices in India.